Ceramic Angel Oil Burner

SAFETY INSTRUCTIONS

Ceramic Burners

Before use

• Place the burner on a stable, level, heat-resistant surface, away from curtains, paper, draughts and other flammable materials.
• Check the burner for cracks, chips or damage before every use. Do not use a damaged burner.
• Keep out of reach of children and pets.
• Use only suitable tea light candles that fit safely inside the burner. Never use an alternative heat source.

How to use

1. Place the burner on a heat-resistant surface in a well-ventilated area.
2. Fill the upper bowl with water, leaving sufficient space to prevent overflowing.
3. Add a few drops of essential oil to the water, following the oil supplier’s recommended dilution.
4. Position the tealight candle securely in the designated holder and light it carefully.
5. Never leave the burner unattended while the candle is burning.
6. Monitor the water level regularly. Never allow the bowl to boil dry.
7. Extinguish the candle if the burner becomes excessively hot, the water level gets too low, or the burner shows signs of damage.
8. Never use the burner without water when using essential oils.
9. Do not ingest essential oils or apply undiluted oils directly to the skin.
10. The Oilindo Essential Oil brand is for EXTERNAL use only.

When Using Wax Melts

• Place a wax melt in the clean bowl with a little water (half a teaspoon)
• Never overfill the bowl or add additional wax while the burner is hot.
• Do not attempt to remove or pour out melted wax while hot.
• Allow the wax to cool and solidify completely before removal and cleaning.
• Never add water to hot wax.

After use

• Extinguish the candle safely and allow the burner to cool completely before touching, moving, or cleaning it.
• Do not move the burner while the candle is lit or while the burner is hot.
• Never pour cold water into a hot burner.
• Do not use abrasive cleaners that may damage the glaze.
• Store in a dry, safe place when not in use.
• Never use the burner for any purpose other than its intended use.

WARNING: Open flame and hot surfaces present a fire and burn risk. Use with care and always supervise while in operation.